load previously-saved settings (if available) from the memory card using Save/load settings > Load settings.Ĭhanges from Previous Versions Changes from “C” Firmware Version 1.20 to 1.30.reset all setting using Reset all settings > Reset, or.After performing the update, you will need to either:
Performing a firmware update while the camera is affected by this issue will not in itself correct the problem.- Switching photo shooting menu banks using Photo shooting menu bank.- Loading settings with Save/load settings > Load settings.Fixed an issue that would, when pictures were taken with a flash unit attached, sometimes result in the flash not performing in accordance with the value selected for ISO sensitivity settings > Maximum sensitivity with after either of the following operations:.Select Connect to smart device in the camera SETUP MENU to display the app and camera name if the Bluetooth icon does not flash in the display, you will need to perform the update again.Ĭhanges from “C” Firmware Version 1.30 to 1.31.If the SnapBridge app is unable to connect to the camera after the update, you may not have performed the second update.In either case, the firmware version will be updated when you perform the update a second time.If the firmware version has changed, the “Current” and “New” versions displayed in the “Update?” dialog will be the same otherwise, the two versions will be different. Note that the firmware version may or may not change as a result of the first update.Complete Steps 5 through 7 of “Updating the Camera Firmware”.Contact a Nikon-authorized service representative.” Continue with the second update regardless. During the first update, the camera may or may not display the message, “Update failed.Performing the update for a second time completes the firmware update. You will need to perform the update twice.Updating from “C” Firmware Versions 1.00 through 1.12 to Version 1.20
0 kommentar(er)
